AS-825 600kW Shangchai Diesel Generator | 750kVA Prime Power Genset

The AS-825 600kW Shangchai diesel generator set is a heavy-duty industrial power unit independently manufactured by Aike Power, powered by original Shangchai SDEC 6KTAA25-G32 inline 6-cylinder engine, delivering steady 600kW (750kVA) prime continuous power and 660kW (825kVA) emergency standby power under 50Hz/1500RPM standard speed.

This high-power genset supports full customizable matching: multi-brand alternators, Deepsea / ComAp intelligent control systems, open frame, silent container and mobile trailer types. It fully complies with ISO 8528, CE and GB international standards, widely exported to power-short regions including Southeast Asia, Africa, Middle East for manufacturing factories, mining sites, data centers, agricultural irrigation and large infrastructure construction.

Designed for harsh tropical environments, the standard 40℃ large radiator can be upgraded to 50℃ high-temperature cooling system, with built-in high-performance vibration isolators to reduce long-hour operation fatigue, perfectly meet 24/7 non-stop prime power demand of off-grid industrial projects.

• Inline 6-cylinder 4-stroke turbo intercooled structure, reinforced 4-bolt engine block, low vibration & low noise
• One-cylinder one-head design with side maintenance windows, easy daily repair & low maintenance cost
• Stable fuel consumption: 148L/h at full 100% load, optimized electronic fuel injection system
• Max exhaust temperature ≤600℃, strong adaptability for high-dust mining & farm working conditions

• Steady-state voltage deviation ≤±1%, transient voltage fluctuation controlled within +20%~-15%, recovery time ≤1s
• Frequency recovery within 3 seconds after sudden load change, THF＜3, fully meet NEMA MG1 industrial standard for sensitive equipment (server, medical device)
• Class H brushless alternator, IP23 protection, moisture-proof epoxy winding coating, anti-corrosion for coastal & humid tropical areas

Free combination of engine, alternator and controller brands to match different project budgets and intelligent demands:

1. Controller options: Deepsea DSE6020 single unit AMF, DSE8610 multi-unit parallel, ComAp InteliSys series remote monitoring panel
2. Alternator brands: Aike AK, Stamford, Marathon, Engga, MeccAlte
3. Structure types: Open frame, silent container, mobile trailer, customized rain-proof outdoor cabin

Standard full protection: over speed, low oil pressure, high coolant temp, over voltage, over current, start failure alarm & automatic shutdown. All AS-825 units pass 72h full-load factory aging test, with complete CE, ISO 8528, ISO3046 export documents for customs clearance in Nigeria, Saudi, Vietnam, Indonesia etc.

1. Power core: Shangchai 6KTAA25-G32 inline 6 diesel engine
2. Alternator: Aike AK-600 brushless single bearing alternator (Class H, IP23)
3. Cooling system: 40℃ matched water radiator, safety fan guard, 24V charging alternator
4. Control: Standard Deepsea DSE6020 AMF intelligent controller with PMG
5. Base & shock absorption: Integrated steel skid + built-in vibration isolators
6. Exhaust assembly: Industrial silencer, ripple flexible pipe, exhaust bend
7. Filtration: Dry air filter, fuel filter, oil filter
8. Starting system: 4*200Ah storage batteries, connecting wires & battery rack
9. Accessories: Operation manual, factory test report, certification files

• Deepsea Series: DSE6020 (basic AMF), DSE7320 (remote monitoring), DSE8610 (32 units parallel synchronization)
• ComAp Series: InteliLite AMF, InteliSys NTC parallel controller, MODBUS RS485 remote communication
• Supporting auxiliary cabinet: ATS auto transfer switch, ABB main circuit breaker, centralized parallel cabinet

Stamford / Marathon / Faraday / Engga / MeccAlte brushless synchronous alternator

• 50℃ high temperature radiator, water jacket preheater, oil preheater
• Oil-water separator, low coolant/fuel/oil level sensor
• Heat exchanger cooling tower system for indoor energy center

• Full silent container type, mobile trailer chassis
• External large daily fuel tank, auto fuel filling system
• Dust-proof & corrosion-proof coating for mining / coastal projects
• Complete generator room environmental protection engineering design

1. Large Listed Manufacturing Factories (Vietnam, Indonesia industrial zones)
2. Remote Mining Zones & Oil Drilling Sites (Africa, Middle East off-grid mines)
3. Agricultural Greenhouses & Large Farm Irrigation Pump Stations
4. 1–200MW Turnkey Power Station Multi-unit Parallel System

1. Large Commercial Complexes, Office Towers & Shopping Malls
2. Hospital ICU & Operating Room Uninterrupted Power Supply
3. Data Center / IDC Server Room Backup Power
4. Municipal Water Conservancy Pump Stations & Infrastructure Construction

Containerized silent AS-825 units support full weatherproof, dustproof & sun-resistant performance, suitable for noise-unrestricted remote open areas far from residential districts, effectively resolving critical power shortages in tropical high-temperature countries.

A1: 600kW prime power is designed for 24-hour continuous daily production operation, can run under 70%-100% load stably all year round. 660kW standby power only supports short-time peak power supply during grid failure, not for long-term full-load continuous use, suitable for emergency backup only.

A2: Yes, Aike Power supports fully customized control system matching. You can choose single-unit AMF controller (Deepsea DSE6020 / ComAp InteliLite) or multi-unit parallel synchronization panel (DSE8610 / ComAp InteliSys) according to your power station project scale.

A3: Standard configuration matches 40℃ ambient radiator; we can upgrade to enhanced large cooling system for 50℃ extreme high temperature environment, avoid engine overheating shutdown under full load in hot climate.

A4: Available with optional DSE8610 or ComAp parallel controller, support synchronous linkage of up to 32 units, automatic load distribution, remote centralized monitoring, widely used for factory self-built power plants and mining off-grid power stations.

A5: Optional brands include Aike self-branded AK series, Stamford, Marathon, Engga, MeccAlte brushless alternators, all Class H insulation IP23 protection, meet different budget and export certification requirements.

A6: Open frame model is designed for indoor power room installation. For long-term outdoor use, we recommend silent container type with full weatherproof, dustproof and sun-proof structure, or customize independent rain-proof shelter for open unit.

A7: Unified global warranty standard: valid for whichever comes first of 15 months after delivery, 12 months after on-site installation, or 1000 accumulated running hours. Free original spare parts replacement for manufacturing defects within warranty period, global remote technical support lifelong.

If you need 600kW Shangchai industrial generator for factory prime power, mining off-grid supply, data center or agricultural irrigation projects, contact Aike Power professional engineering team right now.
We provide free power load calculation, customized controller & alternator matching scheme, dimension drawing and competitive factory-direct quotation within 24 hours. Global after-sales spare parts warehouse support for Southeast Asia, Africa and Middle East markets.

All AS-825 Shangchai gensets comply with international standards:

• Genset standard: ISO 8528:2018, GB/T 2820-2022
• Engine standard: ISO 3046, BS 5514
• Alternator standard: BS EN 60034, NEMA MG1-22.43
  Full CE certification, factory full-load test report, export CO certificate can be provided for customs clearance of all countries.